Tag Archives: CEREC crowns

CEREC crowns

Help! My Crown Keeps Coming Out!

Hi there,

Last year, I had a same-day CEREC crown done on one of my teeth. I was happy with it at first, but since then, it has fallen out several times. Each time I go back to the dentist to get it fixed, but it always falls out again. Finally, I went to a different cosmetic dentist. He replaced the setting for the crown, and said that I should get a new all-porcelain crown, as it would stick to the cement better. I just want my tooth to stay put, like it’s supposed to. I’m not sure what else I can do.

Nephenee, from South Carolina

 

Hi Nephenee,

No matter what material your CEREC crown was made from, it will stay permanently once properly placed and bonded. Making a new crown will not fix the problem, as it is not the crown’s fault it keeps coming out.

Crowns need strong cement and to be properly shaped to stay in place. If your dentist over-prepared your crown and shaped it too much, no cement will be able to hold it in.

It’s likely your crown was prepared with inadequate retention form in mind. You will need a crown specialist to properly shape your tooth and cement it in place. Look for a dentist with experience in dental crowns, or another CEREC dentist in the area.

This blog post is brought to you by Gilbert CEREC crown provider, Dr. Matthew Roper, of Vista Dorada Dental.

 

CEREC crowns

My Porcelain Crown Keeps Falling Off!

Hi there,

I was issued a same-day crown, which I thought would be fast and convienent, but in the year since I’ve gotten it, it has fallen out a handle of times!

I went to see a different dentist, who changed the setting of my crown, and gave me a zirconia crown. However, even this one has fallen out! He says that a different porcelain crown will stay in better.

Is this dentist right? Should I go to another dentist? Should I give CEREC another try? What should I do?

Nancy, from Trenton, New Jersey

 

Hi there Nancy,

When CEREC same-day crowns are done correctly, they will stay put permanently. CEREC crowns are made from a milled block of ceramic, but no matter what material you use to make a crown, it does not affect whether the crown will stay in.

There are two things that affect whether crowns will stay in. One this is the type of bonding used to cement the tooth into your mouth. The stronger the cement, the better the hold. The other factor is the shape of the tooth. The tooth needs a little bit of tapering to look natural, but the more taper done to the tooth, the harder it will be to bond it into your mouth. It is likely that your tooth was not tapered properly, which is why it keeps falling off.

You should go see a dentist in the area that specialized in crowns. It is very uncommon for crowns to fall out as many times as you have experienced.

This blog post is brought to you by Gilbert CEREC crown provider, Dr. Matthew Roper, of Vista Dorada Dental.

 

 

CEREC crowns

Is My Pain Caused by my CEREC Crown?

Hello there,

I had three CEREC crowns done on my back teeth recently. I was pleased with how convenient getting the CEREC crowns was, but since then, I’ve had a lot of pain when chewing. Eating anything crunchy or chewy causing a bolt of pain, as though a nerve is exposed or something. My dentist has shaved down some of the crown. He says the pain I feel is from how I grind my food when I chew. Is that the case? I’ve tried being more careful when I eat, but the pain I feel makes me nervous during meals.

Richard from Amityville, New York

 

Dear Richard,

There are a few reasons that can cause a new crown to hurt. One reason may be that the crown is too high, so the rest of your teeth hit it first when you bite into something. The second reason is that the tooth under the crown may be infected. The infection can cause inflammation in the jaw, causing constant jolts of pain when biting or chewing.

Your pain is unlikely to be caused by how you chew your food, as you did not have this problem prior to the crown. Also, CEREC crowns are supposed to fit exactly to your mouth’s specifications, as they are milled to fit your teeth precisely.

Since your dentist has tried to grind down the crown, your pain is not likely to be caused by hitting too high on the crown. You will need to find out if you have an infection, and where it is in your mouth. An X-ray will be needed, and you may want to seek a second opinion if you do not trust your current dentist’s skills.

This blog post is brought to you by Gilbert CEREC crown provider, Dr. Matt Roper, of Vista Dorada Dental.

 

 

CEREC crowns

Is My CEREC Crown Causing My Sensitivity?

Hi,

My dentist recommended a CEREC crown to replace one of my teeth. This tooth has had issues to sensitivity to hot and cold, and I thought getting a crown would solve this problem. My dentist did not think I needed a root canal. However, after getting my CEREC crown, I’m still having a lot of sensitivity and discomfort. My dentist said to wait a month or so my mouth to get used to the crown. In the meantime, I’ve experienced sharp, throbbing jaw pain. I have had to medicate it with pain killers for a few weeks. I’ve had the crown for over a month, but it feels nothing like the other porcelain crowns I have. Am I correct in thinking the CEREC crown the source of my pain?  And what should I do?

Thank you,

Magnus, from Alberta, Canada

 

Hi Magnus,

Your issue is not likely caused by the CEREC crown, but rather the tooth itself. Tooth sensitivity to hot and cold is caused by irritation, and getting a crown can cause more irritation. Other options instead of a crown would include removing any current fillings or decay, and then filled the tooth with a bonding material to create a new core. If the new core did not reduce or eliminate the pain, then an x-ray and root canal may be needed.

CEREC crowns are more likely to fit better than traditional porcelain crowns, as they are milled by a computer based on a digital scan of your mouth. However, any crown you put over a sensitive tooth is unlikely to stop the issue.

When a tooth is infected, it will often feel worse before it feels better. If it suddenly starts to feel better, that means the pulp inside of your tooth has died, and a root canal is needed to clear it out.

Your best option is to get a second opinion about whether you need a root canal. You don’t need to go back to your same dentist who made the crown.

This blog is brought to you by Gilbert CEREC provider, Dr. Matthew Roper, of Vistadorada Dental.

CEREC crowns

What is a cerec crown?

If you are in need of a crown, but haven’t considered a CEREC crown, or are unsure of what they are, it’s important to take time to understand the science behind them, and why they are exceptional.

What is a CEREC Crown?

Many dental offices have technology which enables them to provide “computer-assisted design-computer-assisted manufacture”, or CAD-CAM crowns. CEREC is the company that is most known for this technology. This type of crown is created by a computer to perfectly fit your tooth, which prevents the need for the lab involvement in manufacturing the crown.

This technology allows the all-ceramic crown to be made while you wait, thus there is no need for a second appointment or temporary crown.

Facts About CEREC Crowns

  1. No single brand of same-day crowns. Though many people ask for same-day crowns by asking for CEREC crowns, this is an brand of same-day crowns, similar to Zoom Whitening, which is a brand of teeth whitening, but there is not a single brand of teeth whitening. CEREC means “Chairside Economical Restoration of Esthetic Ceramics”, but is not the only brand of same-day crowns. Often, the brand will use the phrase “same-day crowns”, or “crowns-in-day,” but these phrases are part of the marketing for the brand. However, the overall idea is the same with all restorations which take place in one dental visit. The office uses CAD/CAM technology to create it.
  2. CEREC crowns are billed the same as traditional crowns. Many people think the CEREC crown costs more than a traditional one. However, the opposite is true. For billing purposes, all dental procedures have billing codes. The billing code is the same for a CEREC crown and a traditional crown, therefore they cannot be billed any differently.
  3. They’re high-tech. CAD/CAM means a computer assists in the design. The program takes a picture of your mouth and plots out every detail. The measurements are exact. Then, the crowns are carved out by a machine in the office, with each new tooth starting out as a piece of material, oftentimes composite, zirconia, ceramic, or acrylic polymer, which is the same base for traditional crowns.

When operated and placed by an experienced cosmetic dentist, CAD/CAM crowns are a quick and efficient way to improve your smile, while maintaining a natural look and feel.

This article is provided by the office of Gilbert CEREC Crown provider, Dr. Matthew Roper.\


CEREC crowns

My crown keeps falling off

I had a CEREC crown placed. However, it has come out several times within the last year. Finally, after the fourth time, I consulted a different dentist, who replaced the crown with a zirconia porcelain crown, but it, too, has come out several times. The dentist suggested a full porcelain crown, stating that the cement is adhering to my tooth, but not the crown. He indicated that the all-porcelain crown is rough of the underneath and would, therefore, bond to the cement more effectively. I’m unsure of what my next step should be, but I am tired of the trouble these crowns have caused. What do you suggest I do?

Thank you,
Kodi

Kodi,

The CEREC crown, or same-day crown, is created by a computer in the dental office, the day of your appointment. When prepared and adhesed correctly, the crown will remain permanently affixed to the tooth. The material of which your crown is made is not indicative of how permanent the bond will be. Whether your crown is porcelain, gold, CEREC, or zirconia, all are made to stay permanently.

However, there are two factors that can determine if a crown will stay on permanently or not. They are the bonding strength of the cement, and the shape of the prepared tooth. The most important of these is the shape. If the tooth is prepared with little taper, a crown can be adhered with a weak cement, and it will stay permanently affixed. However, if there is a lot of taper, even some of the strongest cements will have difficulty staying on.

This is not implying that getting a solid bond between the crown and tooth would not solve your problem. The cement’s strength is important. But, when a tooth is prepared with good retention form, the crown will not fall off multiple times in one year. This indicates that your tooth may have been prepared with retention form that is insufficient.

To move forward, it would be a good idea to consult a dentist experienced in placing crowns that will stay on.

This article was brought to you by Gilbert CEREC Crown provider, Dr. Matthew Roper.

CEREC crowns, Uncategorized

CEREC Crowns help with dental anxiety

If you are a person who suffers from dental anxiety, and haven’t visited a dentist in quite some time, you may not be aware of CEREC crowns, and how these restorations are are changing dentistry and lives.

CEREC crowns are made in the office

It used to be that a crown could only be done by going into the office for multiple visits. The doctor would removed the decay and/or damage, take impressions, and fit you for a temporary crown in the first visit. Your impressions would then be sent to a dental lab, where your restoration would be created, over a two-week timeframe. While some crowns remain this way, CEREC crowns are different.

Years ago, the only option when you needed to have a crown done was to go into the office for two visits. On the first visit, the doctor would remove the decay or damage on the tooth, build it up if need be, take impressions, and fit you with a temporary. Then, your impressions would get shipped off to a dental lab which would then craft your restoration over a period of two weeks. Some crowns are still this way, but CEREC crowns are different. These crowns are made in the office using CAD/CAM technology and a milling machine, allowing your crown to be created and placed all in one visit, easing the anxiety of a dental patient who may be troubled by the idea of multiple visits to the dental office.

Impressions are taken digitally

Often, people with dental anxiety have strong gag reflexes, or aversions to the impression process. The use of the CAD/CAM technology, allows the impressions to be taken digitally, similar to having a photo taken.

Can be combined with sedation dentistry

Nitrous oxide is a helpful way for patients with mild dental anxiety to feel more relaxed and comfortable. It takes effect quickly, and wears off almost immediately after treatment. For those patients with a more intense dental anxiety, conscious sedation will place you in a deeply relaxed state.

This blog is sponsored by Gilbert CEREC crowns dentist, Dr. Matthew Roper.

 

 

CEREC crowns, Root Canals

What are CEREC crowns and are they best?

I haven’t visited the dentist like I should over the past ten years. Because I had a toothache,  I finally went. I knew my teeth weren’t in the best shape and the dentist told me I would need a tooth fixed with a root canal, along with some other cavities filled.  I don’t know if I was just overwhelmed by all the dentist was suggesting I needed done, but I swear he started talking another language. He started talking about getting a serk crown. I have looked on the internet and can’t find anything. Can you please translate? What is it and is it the best thing for a mouth like mine?

JB in Wyoming

Dear JB,

We are assuming, based on the work you need done, that your dentist was recommending getting a CEREC crown. There certainly are words that are dentist lingo and do require some translation and CEREC crowns fit that category as they are a newer treatment option.

What are CEREC crowns?

CEREC machineCerec crowns are porcelain crowns that a dentist can create in the office the same day as your visit for the root canal. The dentist uses computer technology and his expertise to make them. The dentist matches the shade of your teeth to the color of porcelain. Using the computer images of your tooth, a special machine cuts the porcelain to fit your tooth. It is bonded on once the root canal is finished.

As to whether it is best for your mouth, again we are just going by your brief history, but CEREC crowns created by dentists who know what they are doing can be very successful. If they are bonded well and you don’t grind your teeth, they will last as well as other crowns. The only time CEREC crowns aren’t usually preferred is when you need a crown on a front tooth. This is for esthetic reasons. They may not look as natural as other crowns created in a lab for the front teeth.

Since you have questions, it wouldn’t hurt to ask the dental office to see pictures of others who have had CEREC crowns placed or about the dentist’s experience.

This post is sponsored by Vista Dorada Dental in Gilbert, AZ.

 

Affordable Dentistry

Affordable Dentist for a Full-Mouth Reconstruction?

I never got to go to the dentist as a child. I saved up for two years to go now that I’m in college, just to see what I’m dealing with. He said my mouth was in horrible shape and I needed something called a full mouth reconstruction. I knew there’d be some problems because I’d never been, but I was surprised with how dire my outlook was, especially since my teeth have never bothered me (except for how they look). The way he described the reconstruction sounded like I’d really benefit and my teeth would be pretty, but the price is way above anything I can afford. My roommate said I should ask about affordable dentists. She said that’s what her parents always used. They have less frills but you still get care. Can I get one of those for the reconstruction I need?

Mindy L.

Dear Mindy,

Dollar sgn hatching out of an egg

How admirable that you’ve made such an effort to see a dentist. I wish more older adults were as conscientious as you are. Before we get into a reconstruction I want to caution you. Something feels off about this to me.

While I’m sure there were some issues, if you’ve experienced no pain at all, I doubt you really even need a full mouth reconstruction. You should have been in massive pain. I’d love to hear more specifics of why he said you needed one. I don’t want to see you taken advantage of by someone disreputable.

I’d like you to get a second opinion from another dentist in the area. Some dentists will even give you a free second opinion.

Getting a Second Opinion for Affordable Dental Care

When you go in, don’t tell them who the first dentist was or what his diagnosis was. Just go in and tell him you’re looking for a second opinion on a diagnosis you received that seems questionable to you. Tell him you’ll be happy to tell them the dentist and diagnosis after they give their unbiased opinion.

If it turns out he misled you, please turn the dentist into the ethics board. Most dentists are honest and it’s the bad apples that make life harder for the rest of us.

However, if it turns out you do need a full-mouth reconstruction, that’s not something you price shop for. It is one of the most technically advanced procedures a dentist can do. You don’t want it to simply go to the lowest bidder. There are other ways of making this more affordable.

Instead, talk about ways of phasing out treatments. If planned correctly, it doesn’t have to be done all at once. Get the work done on a schedule of most urgent to least. Also, be clear you want to save as much natural tooth structure as possible.

Fillings before crowns. Crowns before extractions. If you need an extraction, dental implants are the ideal replacement but are pricey. However, it’s worth it to get a temporary cheaper one while you save up the good one, especially as young as you are.

This blog is brought to you by Dr. Matt Roper.

Dental Emergency

I Think My Tooth is Crumbling

I had a root canal done. My dentist put in a temporary filling until I could do the dental crown appointment. I’m still a few days away from that. When I went out for a meal today I felt something grainy in my food. I think my tooth is crumbling. What do I do? I don’t want to lose the whole thing and not be able to get the crown.

Emily S.

Dear Emily,

My suspicion is it’s not your tooth crumbling, but instead the temporary filling dislodged. Take a peek at the tooth. If there’s a hole in the center of the tooth, that means you’ve lost the filling. If the shape of the tooth is changing, then the tooth is crumbling.

If it’s just the filling, don’t worry. They’re designed to come out easily so the dentist can do the needed work in time. As your appointment is only a few days away, you can just get some temporary filling material to hold you over until your appointment. It’s designed for people in just your situation. It wouldn’t last for more than a few days, but as you’re going in for your dental crown at that point, no problem. You can find them at most drug stores.

If it’s the tooth, that’s an entirely different situation. You’ll need to be seen right away. Like you said, you don’t want to lose so much tooth structure that you’ll have to get an extraction and replacement tooth. Your dentist should have an after hours protocol. Give them a buzz and there should be instructions on their voicemail.

If they don’t have an after-hours call number, then just see an emergency dentist. They’ll make sure your tooth is protected so you can still get your crown.

This blog is brought to you by Dr. Matt Roper.